What you need?
Volcano Tool - you can learn more about it here http://edtechstore.blogspot.com/2015/03/volcano-unlocking-and-flashing-tool-box.html
USB Micro Cable
Procedure:
1. First Run Volcano software and click Android Tool.
2. Next click the read info button and click start.
3. Then while your phone is turn off with battery, connect it to your PC using micro USB cable.
4. The software will detect your phone and will give the information about it.
What you need to observed is the start address and lenght address. You will use that two address in performing format.
For example in this phone I have this information.
Format Range:
Start Address: 0x16820000 Format Length: 0x8DA0000
5. Now that you have that information, you can now proceed to format your My Phone Ocean Mini. But, before you do that you will have to backup first the firmware so just in case something went wrong during format you will have a firmware that you can use to flash to get it back in previous condition.
6. To do that, click the read flash button and click start. Next, turn off your phone and connect to the computer. The tool will read the firmware for you. Wait till it finish and save to a directory in your computer where you can access it.
7. Ok. We're ready to format the phone. To do that check the format, change the option to manual and input the start address and format length address we have saved during the read info process.
8. Then click start. While your phone is turn off. Connect it to your PC. Wait till the software finished.
9. Disconnect the phone and turn it on.
10. Congratulations! You are done.
If you find this post useful you may Like and Share it to your favorite social network.
If you have some more questions you may leave a comment below.
0 comments:
Post a Comment