B88+ Duo TV No Power Done By Volcano Box

Ok here's my first post to show you how this Volcano box works.  I will demonstrate to you how to revive a dead MyPhone model b88+ duo tv.

What you need:
Volcano Box
Usb cable to connecto your box  to PC
B88+ duo tv firmware


Follow this Volcano software configuration:

1.  Run volcano box
2.  Tick MTK tab
3.  Tick Built in boot 11
4.  Check write Flash
5.  Check USB mode
6.  Click Run
7.  After you click your the software will ask of the firmware you are going to flash.  Browse the location and select the firmware you downloaded.
8.   Turn off your cellphone.  Insert battery and connect usb cable and press power on.  Allow the software to finish the process.
9.  Finally you are done.  Power on the phone and confirm the IMEI is good by *#06#