Samsung Android Tablet Logo When Unlock Screen

This solution was to solve Samsung Android Tablet that hangs in Android logo right after your unlock screen after power on.

Board ID: et_86v2g_a23_v1.2

Tools needed:
Firmware: et_86v2g_a23_v1.2
Flashing Tools: PhoenixSuit

Steps:

1.  Power off your Tablet
2.  Connect the USB into your PC.
3.  Run Phoenix Suit and go to the firware tab.  Click image and browse for the Img file.
4.  Click upgrade.
3.  While holding volume - insert the USB cable to your tablet and press power on 10x until your tablet is recognized by your PC and install the driver for it.  Drivers can be found at the Phoenix Suit as well.
4.  Follow the onscreen procedure